Hammer Strength

Seated Leg Curl de Hammer Strength Select

La máquina Seated Leg Curl de Hammer Strength Select constituye un elemento imprescindible para progresar en los entrenamientos de fuerza. El respaldo acolchado ajustable y la zona acolchada a la altura de los muslos sirven para alinear la posición del usuario y que esté más estable; además, se puede configurar la posición de inicio de cinco formas diferentes. The 22 pieces in the Hammer Strength Select line provide an inviting introduction to Hammer Strength equipment.

Hable con un consultor

Technical Specifications

Código de producto

HS-SLC

Dimensiones (L x An x Al)

55" x 34" x 55" (metric cm: 140 x 86 x 140)

Espacio libre recomendado

89" x 58" x 55" (metric cm: 226 x 147 x 140)

Peso de la máquina

515 lb (234 kg)

Weight Stack(s)

295 lb (138 kg)

Peso máximo del usuario

300 lb (136 kg)

Cables

7x19 strand construction, lubricated, nylon-coated cable meets U.S. military specifications

Carteles de instrucciones

Easy-to-follow instructions illustrate proper use and muscles trained; Axis of rotation marked with red indicator to help cue correct alignment

Cintas y poleas

4-1/2" (11 cm) and 6" (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings

Protección

Pads are molded with radius on edge for improved comfort; All edges are stitched to eliminate any folds in the material that would limit durability

Cubiertas

Standard rear shroud on SE models; Optional full front shroud on SE models

Discos y barras de guía

Solid-steel weight plates. Top weight plate is fitted with self-lubricating bushings; 7/16" (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss; Drop down incremental weight system (standard on SE models)

Ajustes

El mecanismo de rodillos en el ajuste del asiento proporciona un funcionamiento suave

Plataformas para los pies

Revestimiento por spray de polietileno para mayor resistencia contra los golpes, la corrosión y la abrasión

Descripción del marco

Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Standard rubber feet protect base of the frame and prevent the machine from slipping; 11-gauge steel frame ensures maximum structural integrity

Agarres

Grips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant